---
title: "AI Video Product Logo Warping Fix: Why It Happens"
canonical: https://withicarus.com/blog/ai-video-product-logo-warping-fix
site: Icarus
description: "Why your logo, label or product shape warps when a photo becomes an AI video, and the choices that stop it: a clear photo, a simple move and a short clip."
---

# AI Video Product Logo Warping Fix: Why It Happens

Why your logo, label or product shape warps when a photo becomes an AI video, and the choices that stop it: a clear photo, a simple move and a short clip.

_October 9, 2026. Written with AI from the sources listed below, and checked automatically before it went live._

![Woman holding a white skincare bottle with its label facing forward](https://icarus.b-cdn.net/blog/ai-video-product-logo-warping-fix/woman-holding-skincare-bottle.png)

_Made with Icarus_

A logo warps in an AI video because the video tool only copies your photo exactly in the first frame. [OpenAI's video guide says an input image acts as the first frame](https://developers.openai.com/docs/guides/video-generation), and every frame after it is drawn fresh. To fix the warping, leave less for the tool to guess: start from a clear photo, use a simple camera move, keep the clip short and pick a model that suits the clip.

This post covers why a label or shape drifts, how to set up the photo and the move, how to test with cheap drafts before you pay for the final, and what to check before you post the clip.

**Key takeaways**

- Only the first frame is your real photo. The tool draws every frame after it.
- A sharp, front-facing photo in the clip's shape drifts the least.
- Hold still or push in slowly. Spins and orbits make the tool invent the back of the product.
- Draft short and low-res, then make the final once the motion is right.

## Why a logo or label changes once the photo moves

[Google's Gemini API docs say Veo uses the input image as the initial frame](https://ai.google.dev/gemini-api/docs/veo), and [Google Cloud lets you use an existing image as the first frame](https://docs.cloud.google.com/gemini-enterprise-agent-platform/models/video/generate-videos-from-an-image) of a new video. So frame one is your product exactly as you shot it. From the second frame on, the tool is drawing.

That's where drift comes from. The common causes:

- **The product turns.** It shows a side your photo never had, so the tool makes up the back of the box or the far side of the bottle.
- **The type is small.** Fine lettering gets redrawn as shapes that only look like letters.
- **The camera travels too far.** The product shrinks, blurs or leaves the frame, and comes back a little different.
- **The clip runs long.** Small changes in each frame build up.
- **The photo got cropped or squashed on upload.** The tool starts from a worse picture than the one you chose.

Each of these is a choice you make before you press Generate. That's good news, because it means you can head them off.

## Start from a photo the tool can read

The first frame sets the ceiling for the whole clip. If the logo is soft or half hidden there, it won't get sharper later.

![White skincare bottle facing the camera on a plain white background, lit evenly](https://icarus.b-cdn.net/blog/ai-video-product-logo-warping-fix/skincare-bottle-on-white.png)

_Made with Icarus_

The documentation gives you a size to aim for. Google Cloud [recommends an input image of 720p (1280 x 720) or higher, at 16:9 or 9:16](https://docs.cloud.google.com/gemini-enterprise-agent-platform/models/video/generate-videos-from-an-image), and warns that [images of other sizes may be resized or centrally cropped](https://docs.cloud.google.com/gemini-enterprise-agent-platform/models/video/generate-videos-from-an-image) when you upload them. OpenAI goes further: [the image must match the target video's resolution](https://developers.openai.com/docs/guides/video-generation).

What that means for your photo:

- Shoot or make it in the same shape as the clip: tall for reels, wide for a product page banner.
- Point the logo and label straight at the camera.
- Keep the product large in frame, with some space around it so a slow move doesn't cut it off.
- Use even light. Strong glare across a label hides letters the tool then has to guess.

In Icarus, make the still first with your saved product. [Product pinning](https://withicarus.com/features/exact-product) keeps your real colour, logo and stitching in the image. A 2K image costs $0.05 when it holds a saved product, and a 4K one costs $0.11. Then turn that still into the clip, so the video starts from a frame you've already checked.

## Pick a simple move and a short clip

The camera move matters more than anything else in your prompt. Some moves keep the front of the product facing the lens and some swing it away. For a product with a logo or label:

![Leather tote bag standing on a marble shelf in soft window light, seen from the front](https://icarus.b-cdn.net/blog/ai-video-product-logo-warping-fix/leather-tote-on-marble-shelf.png)

_Made with Icarus_

- **Hold still** is the safest. The product stays put while light, steam or the background moves.
- **Push in** works well when it's slow. The label gets bigger, not turned.
- **Slide left or right** is fine for short distances.
- **Orbits, spins and fast pans** cause the most drift, because they show sides your photo never had.

On the video models that offer it, Icarus lets you open Camera and pick push in, pull out, slide left, slide right, rise up, lower down, hold still or shift focus. Or you can leave it on Auto and let the model pick. LTX-2.5 Fast and LTX-2.5 Pro both have this list.

Then write the prompt. OpenAI advises you to [describe shot type, subject, action, setting, and lighting](https://developers.openai.com/docs/guides/video-generation), and Google's guide notes that [specificity helps avoid generic outputs](https://docs.cloud.google.com/vertex-ai/generative-ai/docs/video/video-gen-prompt-guide). Also say what should stay the same: the label faces the camera and the bottle doesn't turn.

> Close-up of a white skincare bottle on a marble shelf, label facing the camera. Slow push in. The bottle stays still and does not turn. Soft morning light from the left, a little steam rising behind it.

Try this prompt in Icarus: https://withicarus.com/dashboard?prompt=Close-up%20of%20a%20white%20skincare%20bottle%20on%20a%20marble%20shelf%2C%20label%20facing%20the%20camera.%20Slow%20push%20in.%20The%20bottle%20stays%20still%20and%20does%20not%20turn.%20Soft%20morning%20light%20from%20the%20left%2C%20a%20little%20steam%20rising%20behind%20it.

Keep it short. OpenAI recommends [shorter clips when you are iterating on prompt, motion, or composition](https://developers.openai.com/docs/guides/video-generation). For a product, a few seconds of clean motion beats a long clip where the label slips halfway through.

## Draft cheap, then make the final

Don't spend your best settings on a clip you haven't seen yet. Test the motion at low resolution first, then make the final once the move looks right.

1. Make the still and check the logo letter by letter.
2. Run a short draft at 480p or 720p.
3. Watch it at full screen and pause on the last frame.
4. Change one thing at a time: the move, the length or the prompt.
5. When the product holds, make the final at the size you need.

The Icarus video models you can use for each stage, at their starting prices:

| Model | What it's for | Price |
| --- | --- | ---: |
| Seedance 2.0 Mini | Drafts at 480p or 720p | from $0.04 a second |
| Seedance 2.0 Fast | Quicker clips at 480p or 720p | from $0.06 a second |
| Seedance 2.0 | Clips from a photo or prompt | from $0.08 a second |
| LTX-2.5 Fast | Clips with sound, 720p to 4K, pick the camera move | from $0.10 a second |
| LTX-2.5 Pro | Sharper clips with sound, 720p or 1080p, pick the camera move | from $0.13 a second |
| Kling 3.0 | Clips with sound and multi-shot | from $0.09 a second |

The sums stay small. Twenty seconds of drafts on Seedance 2.0 Mini at $0.04 a second come to $0.80. On the model Icarus starts you on, a 10-second clip costs $1.19 at 480p, $2.56 at 720p and $6.30 at 1080p. If a clip fails, Icarus gives the money back by itself. Every price is on the [pricing page](https://withicarus.com/pricing).

## Check the clip, then fix it or redo it

Look at every product clip before it goes on a listing or into an ad. Buyers will compare the logo on screen with the one on the box.

![Woman at a desk holding up a ceramic mug to compare it with a second mug in daylight](https://icarus.b-cdn.net/blog/ai-video-product-logo-warping-fix/woman-comparing-ceramic-mugs.png)

_Made with Icarus_

- [ ] Pause on the first, middle and last frame and read the logo each time
- [ ] Check the product's outline: no bent edges, extra caps or melted corners
- [ ] Check the colour against the real product in daylight
- [ ] Watch hands, straps and lids where they touch the product
- [ ] Watch it once at full size on a phone, the way buyers will

Then decide what to do with it.

- **Fine until the last second?** Trim the end. A shorter clip that holds is better than a longer one that slips.
- **One small thing wrong in the background?** Describe the change. Kling 3.0 Omni Edit changes a clip from a written description, and [editing a video you already have](https://withicarus.com/features/edit-a-video) works the same way. Check the edited version just as closely.
- **Logo wrong through most of the clip?** Redo it. Go back to a cleaner first frame, a simpler move or a shorter length. Patching a label that drifts in every frame rarely holds up.

Don't post a clip where the label reads differently from the product you ship. Make a new one instead. Icarus can [turn any photo you make into a short video](https://withicarus.com/features/photo-to-video) when you're ready to try it.

## Questions

### Why does my logo look fine in the first frame and then warp?

The tool uses your photo as the first frame and draws every frame after it. When the product turns, shrinks or blurs, the tool has to redraw the lettering, and small type is where it slips first.

### Which camera move is safest for a product video?

Hold still, or a slow push in. Both keep the label facing the camera. Orbits, spins and fast pans show sides your photo never had, so they cause the most drift.

### Should I fix a warped clip or make a new one?

If it only drifts at the very end, trim it. If one small background detail is off, describe the change in a video edit. If the logo is wrong through most of the clip, make it again with a cleaner photo, a simpler move or a shorter length.

### Does a bigger starting photo help?

Yes, as long as it's sharp and the same shape as the clip. Google Cloud recommends at least 720p at 16:9 or 9:16, and warns that photos in other shapes may be cropped or resized when you upload them.

## Sources

- [Video generation with Sora | OpenAI API](https://developers.openai.com/docs/guides/video-generation)
- [Generate videos from an image (Google Cloud)](https://docs.cloud.google.com/gemini-enterprise-agent-platform/models/video/generate-videos-from-an-image)
- [Video generation prompt guide (Google Cloud)](https://docs.cloud.google.com/vertex-ai/generative-ai/docs/video/video-gen-prompt-guide)
- [Veo 3.1 video generation (Google AI for Developers)](https://ai.google.dev/gemini-api/docs/veo)

---

Site: Icarus (https://withicarus.com)
Canonical: https://withicarus.com/blog/ai-video-product-logo-warping-fix
Contact: tanmay@onai.studio